-40%

HMMWV General Support Tool Kit (GSTK) Kent Moore FSI SPX DRAF Humvee M998

$ 1055.99

Availability: 42 in stock
  • Brand: Kent-Moore
  • Return shipping will be paid by: Buyer
  • Condition: All the tools in this kit are in unused, new condition.
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • NSN: 5180-01-389-7561
  • Manufacturer Part Number: HMMWV-GSTK
  • Returns Accepted: Returns Accepted

    Description

    HMMWV General Support Tool Kit (GSTK) Kent Moore FSI SPX DRAF Humvee Maintenance
    Brands:
    Kent Moore, SPX, FSI, Proto, DRAF Industries, Starrett
    Condition:
    New other (opened boxes)
    Kit Type: HMMWV General Support Tool Kit (GSTK)
    NSN#:
    5180-01-389-7561
    Below is an abbreviated inventory list.  The complete list can be seen in the last 3 pictures of this listing.
    Items shown in picture #2:
    Draf 552 Power Steering System Analyzer,
    Draf Kent Moore J-39524 Pinion Setting Tool Kit, Draf SPX Kent Moore J-24385 Axle Housing Spreader,
    Draf Industries Automotive Belt Tension Gauge Model 371,
    FSI D100-MIL-1 HYDRAULIC BLIND RIVETER Kit,
    Kent Moore J-21370-6 Servo Pin Height Gauge J-21370-10 4 5 Band Apply Pins,
    Kent-Moore GM Transmission Bushing Service Set J-21465-A, Draf
    Kent Moore SPX Run Flat Tire Compression Tool,
    Kent Moore J-39084 6.5L Diesel Engine Rear Main Seal Installer,
    Kent Moore Univ. Bushing Bearing Seal & Gear Remover Puller Set J-29369 J-26941
    Items shown in picture #3:
    SPX Kent Moore J-8763-B Transmission Holding Fixture, SPX Kent Moore J-03289-20 Bench Mount Transmission Holding Fixture,
    Diesel Timing Tachometer Tester Tech-Time Model 3300-S DTI,
    Starrett Dial Indicator 25-141J Lug Back 0-0.25” Range / 0.001”,
    Draf Kent Moore J-35199 Pinion Setting Gauge Tool Kit,
    Kent Moore J-33149-A Axle Holding Fixture,
    Kent Moore SPX J-35178 Camshaft Bearing Remover Installer,
    Kent Moore SPX Compression Gauge J-6692-B and Adapter J-26999-30
    Items shown in picture #4:
    Tie rod separator, Yoke Seal Installer (J-29162), Drive transmission handle (Draf 551), Power steering pump pulley installer (Draf 553), Geared hub input seal inserter (Draf 579), Geared hub seal inserter (Draf 580), Geared hub socket wrench (Draf 581), Governor weight support (J-16313), Pilot tube mandrel (J-16314), Replacement bushing kit (J-18411), Transfer pump end cap socket (J-20548), Clutch spring compressor adapter (J-21664), Rear bearing pinion remover (J-21786), Bearing/Bushing remover (J-21786), Slide Hammer adapter (SPX 8007), T27 Torx bit, Output shaft seal inserter (J-22661), Yoke seal installer (J-29162), Oil seal installer (J-21359), Seal inserter (J-33153), Clutch Spring Compressor (Draf 4670), Inner clutch alignment tool (J-24396), Bearing and bushing inserter (Draf 576), Hydraulic valve lifter remover (J-29834), Rack Piston steer gear punch (J-21552), Bearing/Brush remover (Draf 6221), Bearing/Brush inserter and remover (Draf 6278), and more transmission tools.
    Items shown in picture #5:
    Proto 19mm 16mm 14mm crowfeet, Proto 9/16 5/8 11/16 7/8 15/16 crowfeet, Proto 6mm 7mm 8mm hex head sockets, Proto 1/8 5/32 1/4 5/16 hex head sockets, Proto 3/8" deep well socket, Kent Moore SPX J-25306 and J-35205 Torque wrench adapters, SPX J-35165 OTC E6 Torx socket, Draf (kent moore equivalent) 35169 diesel timing gage (some of these are metal, and some are red plastic), SPX J-35208 Elbow pipe to tube adapter, SPX J-35209 quick coupling.
    HMMWV Engine Lifting Bracket 6.2L 6.5L SLING LEVELING FIXTURE
    The military paid over ,250 for each of these kits.  You can't buy this kit anywhere else for this price.  If you have a HMMWV this custom kit is made for you. Please view the last 3 pictures for the complete inventory list. This kit will ship in multiple large boxes.
    Please refer to the pictures before buying.
    Thank you for looking! Be sure to check out our eBay
    Store
    for more!
    We strive to receive Positive Feedback from our customers. If unsatisfied with the item(s) received please contact us through eBay's Messaging system beforehand so we can resolve the issue.  You may also feel free to contact us via eBay Message.
    Payment:
    Paypal
    is our preferred payment method.
    We would like to receive the full payment within 3 days of winning the item.
    We will ship the item(s) won once the full payment is received.
    Please let us know if you need more time to pay.
    Shipping:
    We usually ship in 1 business day.
    Items purchased will ship out on Monday-Friday before 3:00PM (Central Time Zone).
    We do
    not
    ship items on Saturdays, Sundays, or Holidays.
    Our ship prices are based on Lower 48 states.
    Shipping to AK, HI, and PR may be additional depending on the item
    International Shipping:
    We do offer international shipping. However, please contact us for a quote prior to purchase.
    Thank you for visiting. . .
    Thank you for your Support!
    . .
    Be sure to
    Follow Us
    to keep up with what we get in stock!