HEATERS DIAGNOSTIC USB INTERFACE Eberspacher Espar Edith & Webasto Thermo Test

Description

The USB  interface
for Webasto and Eberspacher heaters
with additional connectors
Works with 12 /24 voltage, and
all Windows OS
Microcontroller in this kit is based on high quality FTDI communication chip compatible Air Top Evo
Total cable length - 2,2 meters
You will get connection patterns for different models and instructions
Perform a diagnosis and clear the errors.
The software is available on the following languages– English, Russian(
Руский
), Danish(Dansk),
German(Deutsch),
Spanish(Espanol), French(Francais), Polish(Polski), Finnish(
Suomi)
100%TESTED - ORIGINAL FOR WEBASTO AND EBERSPACHER
Functions:
Read and clean formed errors
Heaters parameters and operating data are displayed
Graphs of actual values of components
Component test
(water pump, fuel pump, combustion fan, glow plug, relay)
CO
2
calibration
Information about heater
(hours of working, model and year of manufacture, etc.)
Thermo Top EVO C/E/P/S/T/V/Z/98
Air Top 2000/ 2000S /2000ST /2500/3000/5000
Thermo 50/90/90S/230/300/350
DW 80/230/300/350 / BW 80
DBW46 / BBW46
Telestart
IPCU
W-Bus
Thermo Top C, E, Handel, P, C/Z MB/D
Thermo Top C/Z BMW
Thermo Top Audi
Thermo Top C/Z Fiat
Thermo Top PSA
Thermo Top Rover
Thermo Top (98)
Thermo 50 (67339A), (67339B)
Thermo 90 (S)
Thermo 230/300/350 (E1), (E2), (SG1572)
Air Top Evo 2000
Air Top Evo 3900
Air Top Evo 5500
Air Top 2000 STC
RHx-100/MHx-100
W-bus protocol < V3,5
DW/BW 80
DBW/BBW 46S...
...etc..
This item includes:
1 x USB diagnostic cable
1 x OBD adaptor
2 x Connectors for different type heaters
1 x 2GB USB flash drive with everything you need to perform diagnostic
Tracked worldwide shipping.
Standard shipping in Europe 4 to 12 working days
Standard shipping outside Europe 6 to 32 working days