For Detroit Diesel 60 Series Cam Gear Retaining Tool J-35652-A Alt to M30116

Description

Features:
1. Fitment: Suitable for Detroit Diesel Series 60 engines.
2. Direct Replacement: Alternatives to J-35652-A.
3. Powerful Function: This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
4. Nice Design: The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
5. Material: Made of top strong iron which can withstand impact, and the surface is covered with a black coating to resist corrosion so that can ensure a longer service life.
Descriptions:
Fitment
VISA-POWER
For Detroit Diesel 60 Series Cam Gear Retaining Tool J-35652-A Alt to M30116
Features:
1. Fitment:
Suitable for Detroit Diesel Series 60 engines.
2. Direct Replacement:
Alternatives to J-35652-A.
3. Powerful Function:
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
4. Nice Design:
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
5. Material:
Made of top strong iron which can withstand impact, and the surface is covered with a black coating to resist corrosion so that can ensure a longer service life.
Descriptions:
Fitment
Suitable for Detroit Diesel Series 60 engines.
Alternatives to J-35652-A.
Powerful Function
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
Usage guidance
1. Insert the shoe of the camshaft drive gear torque holding tool, J 35652-A part of J 35652 , through a lightening hole of the camshaft drive gear.
2. Using the 3/4 in. square hole in the center of the crankshaft pulley, bar the engine over slightly to position the camshaft drive gear holding tool so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover.
3. Install the camshaft drive gear torque holding tool, J 35652-A part of J 35652 to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case.
Item Specifics
Brand :
VSSHOP
Manufacturer Part Number :
VSQP506
Type :
Cam Gear Retaining Tool
Warranty :
1 Year
Color :
Black
Payment
1. Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit
card and your paypal balance.
2. All major credit cards are accepted through our secure payment processor Payoneer.
3. We ship items to Your Ebay address.Please make sure your
Ebay
address is correct
before you pay, cause it cannot be changed once the order shipped out.
Shipping
1. Item will be shipped out
within 1-2 business day
after clear payment received.
2. Please make sure shipping address on your Ebay account is
correct & up-to-date.
3. All of our items are shipped from our US warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee.
3. If you need return, please
contact
our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
Please contact us via ebay using"Contact member".
We will respond within 1 business day
or less.Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.
Please include your ebay item number or order number in
all communications.
VISA-POWER
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
New Arrival !
DIY Blacksmith Accessories
Outboard Boat Accessories
ATV UTV Truck Accessories
Caterpiller CAT Accessories
DD/GM/LS Engine Parts
Volvo & Mack Accessories
Oil Filter Wrench Caps
Car Accessories
Jeep Wrangler Accessories
Ford Mustang/F- Accessories
Dodge Accessories
Chevrolet Accessories
Motocycle Accessories
Tools
Other
High Recommended
Automotive Part Tool
Crankshaft Gear&Front Crank Seal Installer JDG954B for John Deere 1039 4045 6059
USD 199.97
Front & Rear Crankshaft Seal Remover Installer Kit for Cummins ISX QSX ISX15/12
USD 375.58
3162992 Front Crankshaft Seal Remover Installer Tool For Cummins ISX QSX Diesel
USD 197.98
61850 Truck Hub Seal Installer Set for Class 7 & 8 M Duty & Road Trucks Trailers
USD 111.95
Knife Making Tongs Bladesmith Tong Set & Blacksmith Hammer 1.5 kg Forge Tools
USD 131.99
Front &Rear Crankshaft Seal Wear Ring Installer & Remover Set For Ford 6.0L 6.4L
USD 799.99
Diesel Front & Rear Crankshaft Seal Wear Sleeve Installer For CAT 3408 3406 C-15
USD 272.99
Transmission Pto Fast Cooler Manual Trans for GM NV4500 NV5600 G56 Ford ZF 5
USD 97.89
4531 Harmonic Balancer Puller Installer Set for Harmonic Balancers Drive Pulleys
USD 93.50
Cummins NT 855 & N14 Rear Seal & Wear Sleeve Installer Tool Alt ST-262 4919705
USD 310.00
3163021 3163069 For Cummins ISX QSX Timing Injector Cam Gear Puller Tool Kit
USD 94.99
307675 Double Clutch Dry DPS6 Transmission Installer Remover Tool for Volvo Ford
USD 164.98
60" LED Tailgate Strip Light Bar Reverse Brake Turn Signal Light for Car Truck
USD 17.74
Hot Item
74mm Oil Filter Cap Wrench Socket Remover Tool for Benz,Audi,VW,BMW Motorcycle
USD 11.94
5Pcs Exterior Door Handle Insert Cover for 2007-2018 Jeep Wrangler JK JKU 4 Door
USD 20.99
6.0 IPR Valve Socket and HPOP Air Test Fitting Tool for Ford 6.0L Powerstroke
USD 24.83
14 Flute Oil Filter Wrench Cap Removal Tool For Toyota Corolla Camry RAV4 Lexus
USD 9.00
5Pcs Door Grab Handle Cover + Push Button Knobs Trim for 07-18 Jeep Wrangler JK
USD 29.00
New List Item
Crankshaft Gear&Front Crank Seal Installer for John Deere 1039, 4045, 6059 &6068
USD 179.99
64mm Rear Differential Pinion Bearing Nut Socket Tool For Honda TRX 420 Rancher
USD 51.69
Jet Pump Rebuild Kit & Impeller Removal Installation Tool For SeaDoo RFI GS GSI
USD 125.99
T-2926 4th Clutch Piston & Lip Seal Installer Protector Tool GM 4L80E J-38731
USD 131.98
Inner Axle Side Seal Installation Tool for Dana 30, 44 & 60 Front Differentials
USD 52.90
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
For Detroit Diesel 60 Series Cam Gear Retaining Tool J-35652-A Alt to M30116
Item Specifics
Brand :
VSSHOP
Manufacturer Part Number :
VSQP506
Type :
Cam Gear Retaining Tool
Warranty :
1 Year
Color :
Black
Features:
1. Fitment:
Suitable for Detroit Diesel Series 60 engines.
2. Direct Replacement:
Alternatives to J-35652-A.
3. Powerful Function:
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
4. Nice Design:
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
5. Material:
Made of top strong iron which can withstand impact, and the surface is covered with a black coating to resist corrosion so that can ensure a longer service life.
Descriptions:
Fitment
Suitable for Detroit Diesel Series 60 engines.
Alternatives to J-35652-A.
Powerful Function
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
Usage guidance
1. Insert the shoe of the camshaft drive gear torque holding tool, J 35652-A part of J 35652 , through a lightening hole of the camshaft drive gear.
2. Using the 3/4 in. square hole in the center of the crankshaft pulley, bar the engine over slightly to position the camshaft drive gear holding tool so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover.
3. Install the camshaft drive gear torque holding tool, J 35652-A part of J 35652 to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case.
Payment
Shipping
Returns
Contact Us
1. Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit
card and your paypal balance.
2. All major credit cards are accepted through our secure payment processor Payoneer.
3. We ship items to Your Ebay address.Please make sure your
Ebay
address is correct
before you pay, cause it cannot be changed once the order shipped out.
1. Item will be shipped out
within 1-2 business day
after clear payment received.
2. Please make sure shipping address on your Ebay account is
correct & up-to-date.
3. All of our items are shipped from our US warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee.
3. If you need return, please
contact
our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via ebay using"Contact member".
We will respond within 1 business day
or less.Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.
Please include your ebay item number or order number in
all communications.
All right reserved.