Engine Carbon Deposition Walnut Sand Cleaner Tester Intake Pipe Valve Cleaning

Description

Store category
Sign Up Now !
You may also like
Engine Carbon Deposition Walnut Sand Cleaner Tester Intake Pipe Valve Cleaning
Product Description
Description：
AUTOOL HTS558 is a de-carbon device for intake valve cleaning, whose working principle is to blast the walnut media into the intake valve through high-pressure airflow. The carbon deposits on the valve and cylinder wall impacted down. The walnut media and carbon deposit mixture can be recycled through special joints.
It can deeply remove the sticky carbon deposits on the intake manifold, intake valve and exhaust valve. Effectively solve the problems of unstable idling, insufficient air intake, insufficient power, and insufficient acceleration.
What is walnut powder(sand)?
(1)Crash walnut shell into powder, after a vigorous selection process then we get walnut sand. It show high performance in the three area: hardness, anti-pressure, wear-resisting. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.(2)It was hardly dissolved in acid, alkali and water.
(3)Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition, it will clean intake pipe and back side of intake valve thoroughly but no damage
What is carbon deposition?
There are some hydrocarbon olefin residues attach on engine intake,cylinder when fuel burn in engine not completely. These residues change into hard black shell in high temperature condition , that called carbon deposition.
Why need clean carbon deposition?
Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...all the thing will hurt engine deeply. So normally we should clean carbon deposition after every 40000-50000 kilometer trip
Why do we choose the walnut powder to clean the deposit?
1. Chemical cleaning agent will corrodes pipe and shortens the lifetime of engine.
2. Walnut powder is pure natural polish material. It show high performance in hardness, anti-pressure and wear-resisting. Walnut powder hardness was lower than metal but higher than carbon deposition. Take these advatages, AUTOOL HTS558 will clean clean intake pipe and back side of intake valve thoroughly but no damage
How to use?
1 Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2-4KG ), press dust guard on walnut powder then close cover;
2 Join spary gun muzzle and recycle hose together (there is a hole on recyclehose);
3 Remove intake manifold of engine, plug spary gun into intake, turn crankshaft to close intake valve. Connect high pressure air pump((not include)) to HTS558;
4 Connect AC power, start clean. The process should last 1-3 minutes(depending on carbon deposition circumstances);
5 Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times(depending on carbon deposition circumstances)
Feature：
1.【Deep removal of carbon deposits】Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)
2.【External air source】This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
3.【Built-in dust filter】It can separate the recovered walnut sand grit from carbon deposits for recycling.
4.【Integrated design】The walnut sand grit can be sprayed and recovered simultaneously.
5.【3 year warranty】For damage caused by non-human factors, we promise to resend parts for free within 3 years.
Parameter:
1.Air pump pressure should be greater than 0.7Mpa (7bar / 102PSI)
2.The diameter of walnut powder should be between 0.4-0.8mm, and the quantity should be 2-4KG (4-9LB)
3.Cleaning time is between 1-3 minutes
Package include:
1x AUTOOL HTS558 unit
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal only.
1. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!
2. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !
3. Please make the
payment within 3 days.
Delivery details
We only ship parcel to the address in eBay payment.Please make sure payment address in eBay is correct.
1. Some shipping services provide an estimate for the number of days that it will take the carrier to deliver the item to the buyer.This transit time does not include the seller's handling time..Transit time includes normal weekdays. Often Saturdays, Sundays, and major holidays are not included in transit time estimates.
2.
Any non-received items caused by invalid address registered on eBay are not in our full refund or replacement policy
.
3. According to your choice, we can provide standard shipping methods and paid courier services.
Terms of sales
1. Item may be returned for refund or replacement
within 30 days
of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable.
2. Defective products may be returned for repair up to
1-3 year
from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
3. Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.
About us
1. We are a professional worldwide wholesale company, with own factory located in China.
A shop specializing in auto repair tools,
please pay attention to us!
2. We are a professional Authorized dealers of
AUTOOL and MR CARTOOL
. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
3. It now own three warehouse in the world:
China warehouse, United States warehouse, Germany warehouse
and Russian warehouse
it is now one of the biggest online commercial corporations in China.
Contact us
1. Our normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME,
which is 9 pm to 6 am Eastern Time
.
2. Please email me through "MY MESSAGES" on eBay, if you have any questions about our listings or inventory or troubles.  Welcome your any-time parchase!
3. In order to provide you the best service, please treat the transaction fairly.
Positive Feedback and 5-stars
of DSR are our life, before you leave a neutral or negative feedback, please DO contact us to get a better solution,
We work hard to make sure every customer 100% satisfied and resolve any problem for you.
Feedback