Cisco 2522 Frame Relay Switch With Two RJ45 Transceivers

Description

Enable Password: cisco
Manufacturer: Cisco Systems
Part Number: CISCO2522
Condition: Used
Warranty: 30 days
What's in the package?
One (1) CISCO2522 Router
Two (2) DCE/DTE DB60 1-Ft Crossover Cable, 0242 -Cisco Router to Router Cable
One (1) Power cable
One (1) Rack Mount Kit
One (1) CentreCOM 210TS(Twisted pair Transceiver IEEE 802.3 10Base-T)
One (1) TPT 92 Series 802.3 10Base-T Transceiver with Lanview (Cabletron Systems)
This router has 1 Ethernet port, 2 serial ports, 8 Async/sync serial ports, and 1 ISDN Bri Interface.
frame_relay_switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 03-Feb-02 22:01 by srani
Image text-base: 0x0307EEE0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)
frame_relay_switch uptime is 6 minutes
System returned to ROM by power-on
System image file is "flash:c2500-jk8os-l.122-1d.bin"
cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 05375839, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
8 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
frame_relay_switch#sh ip int br
frame_relay_switch#sh run
Building configuration...
Current configuration : 2066 bytes
!
version 12.2
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname frame_relay_switch
!
logging rate-limit console 10 except errors
enable secret 5 $JHYN$PHUAsNDhI43lgbPzPFR.B/
!
ip subnet-zero
no ip finger
!
no ip dhcp-client network-discovery
frame-relay switching
!
!
!
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
no ip address
encapsulation frame-relay
no fair-queue
clockrate 64000
frame-relay intf-type dce
!
interface Serial1
description Connected to RD S0/0
no ip address
encapsulation frame-relay
clockrate 64000
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 102 interface Serial2 201
frame-relay route 103 interface Serial3 301
!
interface Serial2
no ip address
encapsulation frame-relay
clockrate 64000
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 201 interface Serial1 102
frame-relay route 203 interface Serial3 302
!
interface Serial3
no ip address
encapsulation frame-relay
shutdown
clockrate 56000
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 301 interface Serial1 103
frame-relay route 302 interface Serial2 203
!
interface Serial4
no ip address
shutdown
clockrate 56000
!
interface Serial5
no ip address
shutdown
!
interface Serial6
no ip address
shutdown
!
interface Serial7
no ip address
shutdown
clockrate 56000
!
interface Serial8
no ip address
shutdown
!
interface Serial9
no ip address
shutdown
!
interface BRI0
no ip address
shutdown
isdn x25 static-tei 0
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
!
router eigrp 10
network 151.200.30.0 0.0.0.255
auto-summary
no eigrp log-neighbor-changes
!
ip kerberos source-interface any
ip classless
ip http server
!
connect r1-r2 Serial2 101 Serial1 201
!
!
connect r1-r4 Serial2 102 Serial0 202
!
!
!
alias exec c config t
!
line con 0
exec-timeout 30 0
logging synchronous
transport input none
line aux 0
line vty 0 4
login
!
end
frame_relay_switch#sh ip interface brief
Interface IP-Address OK? Method Status Protocol
BRI0 unassigned YES NVRAM administratively down down
BRI0:1 unassigned YES unset administratively down down
BRI0:2 unassigned YES unset administratively down down
Ethernet0 unassigned YES NVRAM administratively down down
Serial0 unassigned YES NVRAM down down
Serial1 unassigned YES NVRAM down down
Serial2 unassigned YES NVRAM down down
Serial3 unassigned YES NVRAM administratively down down
Serial4 unassigned YES NVRAM administratively down down
Serial5 unassigned YES NVRAM administratively down down
Serial6 unassigned YES NVRAM administratively down down
Serial7 unassigned YES NVRAM administratively down down
Serial8 unassigned YES NVRAM administratively down down
Serial9 unassigned YES NVRAM administratively down down
frame_relay_switch#
frame_relay_switch#
frame_relay_switch#